In this section, you will:
A reversible heat pump is a climate-control system that is an air conditioner and a heater in a single device. Operated in one direction, it pumps heat out of a house to provide cooling. Operating in reverse, it pumps heat into the building from the outside, even in cool weather, to provide heating. As a heater, a heat pump is several times more efficient than conventional electrical resistance heating.
If some physical machines can run in two directions, we might ask whether some of the function “machines” we have been studying can also run backwards. [link] provides a visual representation of this question. In this section, we will consider the reverse nature of functions.
Suppose a fashion designer traveling to Milan for a fashion show wants to know what the temperature will be. He is not familiar with the Celsius scale. To get an idea of how temperature measurements are related, he asks his assistant, Betty, to convert 75 degrees Fahrenheit to degrees Celsius. She finds the formula
and substitutes 75 for
to calculate
Knowing that a comfortable 75 degrees Fahrenheit is about 24 degrees Celsius, he sends his assistant the week’s weather forecast from [link] for Milan, and asks her to convert all of the temperatures to degrees Fahrenheit.
At first, Betty considers using the formula she has already found to complete the conversions. After all, she knows her algebra, and can easily solve the equation for
after substituting a value for
For example, to convert 26 degrees Celsius, she could write
After considering this option for a moment, however, she realizes that solving the equation for each of the temperatures will be awfully tedious. She realizes that since evaluation is easier than solving, it would be much more convenient to have a different formula, one that takes the Celsius temperature and outputs the Fahrenheit temperature.
The formula for which Betty is searching corresponds to the idea of an inverse function, which is a function for which the input of the original function becomes the output of the inverse function and the output of the original function becomes the input of the inverse function.
Given a function
we represent its inverse as
read as
inverse of
The raised
is part of the notation. It is not an exponent; it does not imply a power of
. In other words,
does not mean
because
is the reciprocal of
and not the inverse.
The “exponent-like” notation comes from an analogy between function composition and multiplication: just as
(1 is the identity element for multiplication) for any nonzero number
so
equals the identity function, that is,
This holds for all
in the domain of
Informally, this means that inverse functions “undo” each other. However, just as zero does not have a reciprocal, some functions do not have inverses.
Given a function
we can verify whether some other function
is the inverse of
by checking whether either
or
is true. We can test whichever equation is more convenient to work with because they are logically equivalent (that is, if one is true, then so is the other.)
For example,
and
are inverse functions.
and
A few coordinate pairs from the graph of the function
are (−2, −8), (0, 0), and (2, 8). A few coordinate pairs from the graph of the function
are (−8, −2), (0, 0), and (8, 2). If we interchange the input and output of each coordinate pair of a function, the interchanged coordinate pairs would appear on the graph of the inverse function.
For any one-to-one function
a function
is an inverse function of
if
This can also be written as
for all
in the domain of
It also follows that
for all
in the domain of
if
is the inverse of
The notation
is read
inverse.” Like any other function, we can use any variable name as the input for
so we will often write
which we read as
inverse of
Keep in mind that
and not all functions have inverses.
If for a particular one-to-one function
and
what are the corresponding input and output values for the inverse function?
The inverse function reverses the input and output quantities, so if
Alternatively, if we want to name the inverse function
then
and
Notice that if we show the coordinate pairs in a table form, the input and output are clearly reversed. See [link].
Given that
what are the corresponding input and output values of the original function
**Given two functions
and
test whether the functions are inverses of each other.**
or
and
If either statement is false, then both are false, and
and
If
and
is
so
This is enough to answer yes to the question, but we can also verify the other formula.
Notice the inverse operations are in reverse order of the operations from the original function.
If
and
is
Yes
If
(the cube function) and
is
No, the functions are not inverses.
The correct inverse to the cube is, of course, the cube root
that is, the one-third is an exponent, not a multiplier.
If
is
Yes
The outputs of the function
are the inputs to
so the range of
is also the domain of
Likewise, because the inputs to
are the outputs of
the domain of
is the range of
We can visualize the situation as in [link].
When a function has no inverse function, it is possible to create a new function where that new function on a limited domain does have an inverse function. For example, the inverse of
is
because a square “undoes” a square root; but the square is only the inverse of the square root on the domain
since that is the range of
We can look at this problem from the other side, starting with the square (toolkit quadratic) function
If we want to construct an inverse to this function, we run into a problem, because for every given output of the quadratic function, there are two corresponding inputs (except when the input is 0). For example, the output 9 from the quadratic function corresponds to the inputs 3 and –3. But an output from a function is an input to its inverse; if this inverse input corresponds to more than one inverse output (input of the original function), then the “inverse” is not a function at all! To put it differently, the quadratic function is not a one-to-one function; it fails the horizontal line test, so it does not have an inverse function. In order for a function to have an inverse, it must be a one-to-one function.
In many cases, if a function is not one-to-one, we can still restrict the function to a part of its domain on which it is one-to-one. For example, we can make a restricted version of the square function
with its domain limited to
which is a one-to-one function (it passes the horizontal line test) and which has an inverse (the square-root function).
If
on
then the inverse function is
= range of
=
= range of
=
Is it possible for a function to have more than one inverse?
*No. If two supposedly different functions, say,
and
both meet the definition of being inverses of another function
then you can prove that
We have just seen that some functions only have inverses if we restrict the domain of the original function. In these cases, there may be more than one way to restrict the domain, leading to different inverses. However, on any one domain, the original function still has only one unique inverse.*
The range of a function
is the domain of the inverse function
The domain of
is the range of
Given a function, find the domain and range of its inverse.
Identify which of the toolkit functions besides the quadratic function are not one-to-one, and find a restricted domain on which each function is one-to-one, if any. The toolkit functions are reviewed in [link]. We restrict the domain in such a fashion that the function assumes all y-values exactly once.
Constant | Identity | Quadratic | Cubic | Reciprocal |
---|---|---|---|---|
Reciprocal squared | Cube root | Square root | Absolute value | |
The constant function is not one-to-one, and there is no domain (except a single point) on which it could be one-to-one, so the constant function has no inverse.
The absolute value function can be restricted to the domain
where it is equal to the identity function.
The reciprocal-squared function can be restricted to the domain
We can see that these functions (if unrestricted) are not one-to-one by looking at their graphs, shown in [link]. They both would fail the horizontal line test. However, if a function is restricted to a certain domain so that it passes the horizontal line test, then in that restricted domain, it can have an inverse.
The domain of function
is
and the range of function
is
Find the domain and range of the inverse function.
The domain of function
is
and the range of function
is
Once we have a one-to-one function, we can evaluate its inverse at specific inverse function inputs or construct a complete representation of the inverse function in many cases.
Suppose we want to find the inverse of a function represented in table form. Remember that the domain of a function is the range of the inverse and the range of the function is the domain of the inverse. So we need to interchange the domain and range.
Each row (or column) of inputs becomes the row (or column) of outputs for the inverse function. Similarly, each row (or column) of outputs becomes the row (or column) of inputs for the inverse function.
A function
is given in [link], showing distance in miles that a car has traveled in
minutes. Find and interpret
30 | 50 | 70 | 90 | |
20 | 40 | 60 | 70 |
The inverse function takes an output of
and returns an input for
So in the expression
70 is an output value of the original function, representing 70 miles. The inverse will return the corresponding input of the original function
90 minutes, so
The interpretation of this is that, to drive 70 miles, it took 90 minutes.
Alternatively, recall that the definition of the inverse was that if
then
By this definition, if we are given
then we are looking for a value
so that
In this case, we are looking for a
so that
which is when
In 60 minutes, 50 miles are traveled.
To travel 60 miles, it will take 70 minutes.
We saw in Functions and Function Notation that the domain of a function can be read by observing the horizontal extent of its graph. We find the domain of the inverse function by observing the vertical extent of the graph of the original function, because this corresponds to the horizontal extent of the inverse function. Similarly, we find the range of the inverse function by observing the horizontal extent of the graph of the original function, as this is the vertical extent of the inverse function. If we want to evaluate an inverse function, we find its input within its domain, which is all or part of the vertical axis of the original function’s graph.
Given the graph of a function, evaluate its inverse at specific points.
A function
is given in [link]. Find
and
To evaluate
we find 3 on the x-axis and find the corresponding output value on the y-axis. The point
tells us that
To evaluate
recall that by definition
means the value of x for which
By looking for the output value 3 on the vertical axis, we find the point
on the graph, which means
so by definition,
See [link].
Using the graph in [link], (a) find
and (b) estimate
a. 3; b. 5.6
Sometimes we will need to know an inverse function for all elements of its domain, not just a few. If the original function is given as a formula—for example,
as a function of
we can often find the inverse function by solving to obtain
as a function of
Given a function represented by a formula, find the inverse.
is a one-to-one function.
and
Find a formula for the inverse function that gives Fahrenheit temperature as a function of Celsius temperature.
By solving in general, we have uncovered the inverse function. If
then
In this case, we introduced a function
to represent the conversion because the input and output variables are descriptive, and writing
could get confusing.
Solve for
in terms of
given
Find the inverse of the function
So
or
The domain and range of
exclude the values 3 and 4, respectively.
and
are equal at two points but are not the same function, as we can see by creating [link].
|
</math></strong> | 1 | 2 | 5 |
| |
</math></strong> | 3 | 2 | 5 |
Find the inverse of the function
So
The domain of
is
Notice that the range of
is
so this means that the domain of the inverse function
is also
The formula we found for
looks like it would be valid for all real
However,
itself must have an inverse (namely,
) so we have to restrict the domain of
to
in order to make
a one-to-one function. This domain of
is exactly the range of
What is the inverse of the function
State the domains of both the function and the inverse function.
Now that we can find the inverse of a function, we will explore the graphs of functions and their inverses. Let us return to the quadratic function
restricted to the domain
on which this function is one-to-one, and graph it as in [link].
Restricting the domain to
makes the function one-to-one (it will obviously pass the horizontal line test), so it has an inverse on this restricted domain.
We already know that the inverse of the toolkit quadratic function is the square root function, that is,
What happens if we graph both
and
on the same set of axes, using the
axis for the input to both
We notice a distinct relationship: The graph of
is the graph of
reflected about the diagonal line
which we will call the identity line, shown in [link].
This relationship will be observed for all one-to-one functions, because it is a result of the function and its inverse swapping inputs and outputs. This is equivalent to interchanging the roles of the vertical and horizontal axes.
Given the graph of
in [link], sketch a graph of
This is a one-to-one function, so we will be able to sketch an inverse. Note that the graph shown has an apparent domain of
and range of
so the inverse will have a domain of
and range of
If we reflect this graph over the line
the point
reflects to
and the point
reflects to
Sketching the inverse on the same axes as the original graph gives [link].
Is there any function that is equal to its own inverse?
*Yes. If
then
and we can think of several functions that have this property. The identity function does, and so does the reciprocal function, because*
*Any function
where
is a constant, is also equal to its own inverse.*
Access these online resources for additional instruction and practice with inverse functions.
Visit this website for additional practice questions from Learningpod.
is the inverse of
then
for
as a function of
Then exchange the labels
and
See [link].
Describe why the horizontal line test is an effective way to determine whether a function is one-to-one?
Each output of a function must have exactly one output for the function to be one-to-one. If any horizontal line crosses the graph of a function more than once, that means that
-values repeat and the function is not one-to-one. If no horizontal line crosses the graph of the function more than once, then no
-values repeat and the function is one-to-one.
Why do we restrict the domain of the function
to find the function’s inverse?
Can a function be its own inverse? Explain.
Yes. For example,
is its own inverse.
Are one-to-one functions either always increasing or always decreasing? Why or why not?
How do you find the inverse of a function algebraically?
Given a function
solve for
in terms of
Interchange the
and
Solve the new equation for
The expression for
is the inverse,
Show that the function
is its own inverse for all real numbers
For the following exercises, find
for each function.
For the following exercises, find a domain on which each function
is one-to-one and non-decreasing. Write the domain in interval notation. Then find the inverse of
restricted to that domain.
domain of
domain of
Given
and
and
and
a.
and
b. This tells us that
and
are inverse functions
For the following exercises, use function composition to verify that
and
are inverse functions.
and
and
For the following exercises, use a graphing utility to determine whether each function is one-to-one.
one-to-one
one-to-one
For the following exercises, determine whether the graph represents a one-to-one function.
not one-to-one
For the following exercises, use the graph of
shown in [link].
Find
Solve
Find
Solve
For the following exercises, use the graph of the one-to-one function shown in [link].
Sketch the graph of
Find
If the complete graph of
is shown, find the domain of
If the complete graph of
is shown, find the range of
For the following exercises, evaluate or solve, assuming that the function
is one-to-one.
If
find
If
find
If
find
If
find
For the following exercises, use the values listed in [link] to evaluate or solve.
|
</math> </strong> |
</math></strong> | |———- | 0 | 8 | | 1 | 0 | | 2 | 7 | | 3 | 4 | | 4 | 2 | | 5 | 6 | | 6 | 5 | | 7 | 3 | | 8 | 9 | | 9 | 1 |
Find
Solve
Find
Solve
Use the tabular representation of
in [link] to create a table for
|
</math></strong> | 3 | 6 | 9 | 13 | 14 | |
</math></strong> | 1 | 4 | 7 | 12 | 16 |
1 | 4 | 7 | 12 | 16 |
3 | 6 | 9 | 13 | 14 |
For the following exercises, find the inverse function. Then, graph the function and its inverse.
Find the inverse function of
Use a graphing utility to find its domain and range. Write the domain and range in interval notation.
To convert from
degrees Celsius to
degrees Fahrenheit, we use the formula
Find the inverse function, if it exists, and explain its meaning.
Given the Fahrenheit temperature,
this formula allows you to calculate the Celsius temperature.
The circumference
of a circle is a function of its radius given by
Express the radius of a circle as a function of its circumference. Call this function
Find
and interpret its meaning.
A car travels at a constant speed of 50 miles per hour. The distance the car travels in miles is a function of time,
in hours given by
Find the inverse function by expressing the time of travel in terms of the distance traveled. Call this function
Find
and interpret its meaning.
The time for the car to travel 180 miles is 3.6 hours.
For the following exercises, determine whether the relation is a function.
function
for
the independent variable and
the dependent variable
not a function
Is the graph in [link] a function?
For the following exercises, evaluate the function at the indicated values:
For the following exercises, determine whether the functions are one-to-one.
one-to-one
For the following exercises, use the vertical line test to determine if the relation whose graph is provided is a function.
function
function
For the following exercises, graph the functions.
For the following exercises, use [link] to approximate the values.
If
then solve for
If
then solve for
or
For the following exercises, use the function
to find the values in simplest form.
For the following exercises, find the domain of each function, expressing answers using interval notation.
Graph this piecewise function:
For the following exercises, find the average rate of change of the functions from
For the following exercises, use the graphs to determine the intervals on which the functions are increasing, decreasing, or constant.
increasing
decreasing
increasing
constant
Find the local minimum of the function graphed in [link].
Find the local extrema for the function graphed in [link].
local minimum
local maximum
For the graph in [link], the domain of the function is
The range is
Find the absolute minimum of the function on this interval.
Find the absolute maximum of the function graphed in [link].
For the following exercises, find
and
for each pair of functions.
For the following exercises, find
and the domain for
for each pair of functions.
For the following exercises, express each function
as a composition of two functions
and
where
sample:
For the following exercises, sketch a graph of the given function.
For the following exercises, sketch the graph of the function
if the graph of the function
is shown in [link].
For the following exercises, write the equation for the standard function represented by each of the graphs below.
For the following exercises, determine whether each function below is even, odd, or neither.
even
odd
For the following exercises, analyze the graph and determine whether the graphed function is even, odd, or neither.
even
For the following exercises, write an equation for the transformation of
For the following exercises, graph the absolute value function.
For the following exercises, find
for each function.
For the following exercise, find a domain on which the function
is one-to-one and non-decreasing. Write the domain in interval notation. Then find the inverse of
restricted to that domain.
Given
and
and
and
and
and
are inverse functions
For the following exercises, use a graphing utility to determine whether each function is one-to-one.
The function is one-to-one.* * *
The function is not one-to-one.* * *
If
find
If
find
For the following exercises, determine whether each of the following relations is a function.
The relation is a function.
For the following exercises, evaluate the function
at the given input.
−16
Show that the function
is not one-to-one.
The graph is a parabola and the graph fails the horizontal line test.
Write the domain of the function
in interval notation.
Given
find
in simplest form.
Graph the function
Find the average rate of change of the function
by finding
in simplest form.
For the following exercises, use the functions
to find the composite functions.
Express
as a composition of two functions,
and
where
For the following exercises, graph the functions by translating, stretching, and/or compressing a toolkit function.
For the following exercises, determine whether the functions are even, odd, or neither.
Graph the absolute value function
For the following exercises, find the inverse of the function.
For the following exercises, use the graph of
shown in [link].
On what intervals is the function increasing?
On what intervals is the function decreasing?
Approximate the local minimum of the function. Express the answer as an ordered pair.
Approximate the local maximum of the function. Express the answer as an ordered pair.
For the following exercises, use the graph of the piecewise function shown in [link].
Find
Find
Write an equation for the piecewise function.
For the following exercises, use the values listed in [link].
|
</math></strong> |
</math></strong> | |———- | 0 | 1 | | 1 | 3 | | 2 | 5 | | 3 | 7 | | 4 | 9 | | 5 | 11 | | 6 | 13 | | 7 | 15 | | 8 | 17 |
Find
Solve the equation
Is the graph increasing or decreasing on its domain?
Is the function represented by the graph one-to-one?
yes
Find
Given
find
the inverse is a function
such that
for all
in the domain of
this also implies that
for all
in the domain of
You can also download for free at http://cnx.org/contents/13ac107a-f15f-49d2-97e8-60ab2e3b519c@11.1
Attribution: